Looking for some Horstman DXL clutch hubs in the IAME 9/45 taper --- standard (#3906) or extended (#3165) -- only interested in the 8 bolt type -- anyone ?

Joe Combee ? 🤣 . 🤣 . 🤣

Looking for some burned out (non-working) Motoplat ignitions and coils -- wanting for display engines -- Anyone ?? THANKS

Looking for a GEM V12 manifold for a West Bend 820 -- anyone ?

GOOD CATCH !! The Noram dry clutch is in fact legal for class 18 ---- I guess it just got left out --- I will add it and it will appear in the next guideline updates. Thank You.

You are doing a great job Keith -- THANK YOU very much -- one thing I would like to offer up is to investigate the possibility and of course the cost to moving us to a faster server -- this website is...

Under the 2023 VKA Guidelines, I do not see that we have an 8.2 Sidewinder class listed -- the closest I can visualize is the 150cc Sidewinder and it states any engine or axle clutch

The astrick's indicate the helmet has already expired at the end of last year. The expiration date depends on the tag inside the helmet.

Looking for a right hand starter like this one for a West bend 580 / 700 ---- anyone ?  IMG_6436.jpg

Definitely the same company owned by Sweeney Prosser -- THANK YOU for the shout back but I am gonna keep trying to locate the kart example -- there were literally thousand produced -- maybe one will t...

Allot of time and effort by the VKA goes into the guidelines -- they are assembled to create a fair and safe environment, all while trying to incorporate about 30+ years of equipment into the picture ...

I am looking for an old fuel can --- Nitro X --- anyone got one laying around ? Since this is the brew that almost took my life in an accident back in 1971, I would really like to have this for my mus...

Normal oil level is about 1/3 full --- many just fill until the oil fill run out when a fill hole is at about the 4 o'clock position. Will it last at a 5 to 1 gear, that all depends on allot of factor...

Using Acetone as a blender is an option but it is very hard on the seals -- I have had the best luck with ELF-909 oil -- it is a little pricey but I have found no other oil to use in gasoline that is ...