Bill Harrison

919-937-8800

Front Spindles w/ GEM hydraulic shoe-brakes, 4” Wheels, Carlisle Tires & Tubes. ---- $500.00

Rear 1in Live Axle, Axle Bearings, 5” Wheels, Carlisle Tires, Tubes, Airhart hydraulic disk & caliper. ---- $400.00

Two, Side Fuel Tanks w/ Mounting Hardware. ---- $300.00

Butterfly Steering Wheel, Steering Shaft, Tie Rods & Rod End w/ Bearings. ---- $200.00

Or,

Complete Roller w/ Seat Interior - Asking $1,000 or make me an offer.

  I have more photos and will try to answer any questions you may have.

Rich

RALELE@aol.com

Northern, NJ

  I bought a second anodized gold rolling frame for parts. The anodized gold one has the proper scrub-brakes, two original engine mounting plates, both rear tire guards and the correct wheels and tires.

Note: I bought both of these in 2005. Things happen and I never got to work on them.

  I’d like to sell them both together, but I’m open to whatever.

Rathmann Xterminator-Red, 1961?? -- $1,600.00

Rathmann Xterminator-Gold, 1961?? -- $1,500.00

Both Xterminators Together ---------- $2,900.00

I have more photos and will try to answer any questions you may have.

Rich

RALELE@aol.com

Northern NJ

  The rear brake is one Airhart hydraulic caliper w/the disk on the live axel and one Airhart master cylinder.

   Included a West Bends / US Power 820 and as you can see in the photos, it also has a tuned exhaust pipe. There is also an electronic TAC on the steering wheel though I know nothing about it.

   Asking $2,300.00 or make me offer.

 I have more photos and will try to answer any questions you may have.

Rich

RALELE@aol.com

4 wheel breaks. Micron, SMC axel clutch.

Three K1-100s

Spare axle with Horstman Axel clutch.

Stand, three starters, lots of tools, gears (Both belt and chain), spare parts.

$1500.00 takes it all.  No, I do not want to sell piecemeal.  

Chicago Area 

Call 847.486.4007 

Nick

kart or mini bike. I have a mount that bolts to the bottom of the block, I am looking for a mount that bolts to the three bolts on the PTO end of the block.

An AH58 mount will fit. Thank you.

 According to the 2024 rules for Genesee Valley Motorsports Complex (new owner; G.V.K.C. Avon New York) the expiration date for M or SA2015 Snell spec. helmets is 12-31-2025. Could you verify the expiration date in the V.K.A. rules? Also, if it's correct, wouldn't that create a conflict in rules (liability problem, etc.) if an entrant showed up at their track to a V.K.A. event in 2026 to compete, with a 2015 Snell spec helmet?  It seems most helmets are set expire at the 10 year mark.   ( Me; another old karter guy wanting to get back in the seat again )

Thank You.