Vintage Karting Forum
http://vkakarting.com/phpbb/

How to straighten cooling fins
http://vkakarting.com/phpbb/viewtopic.php?f=1&t=4885
Page 1 of 1

Author:  Phil Warlow [ Thu May 24, 2018 2:12 pm ]
Post subject:  How to straighten cooling fins

Any ideas how to straighten cooling fins on Italian engines without breaking them? I just acquired two NOS T80's and the fins on both of the heads are bent. It won't affect performance but it bugs me. I tried tapping in wood wedges and heating with a small propane torch. That didn't work.
Thank you.

Author:  Jeff May [ Fri Jun 08, 2018 5:03 am ]
Post subject:  Re: How to straighten cooling fins

Phil, PM sent

Author:  Phil Warlow [ Fri Jun 08, 2018 1:21 pm ]
Post subject:  Re: How to straighten cooling fins

Hi Jeff,
I'm confused by your post.
Am I SOL?

Author:  Kurt Bogerman [ Sat Jun 09, 2018 10:17 pm ]
Post subject:  Re: How to straighten cooling fins

Phil,

In case this was what confused you:

"PM" = Private Messages. You can access them through the User Control Panel tab at the top of the page.

If I'm way off base, I apologise. Carry on!

Best regards,

Kurt

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/