Vintage Karting Forum
http://vkakarting.com/phpbb/

Flywheel Holder Tool For Mac. Engines
http://vkakarting.com/phpbb/viewtopic.php?f=1&t=4515
Page 1 of 1

Author:  Paul Burkle [ Sat Mar 04, 2017 3:47 pm ]
Post subject:  Flywheel Holder Tool For Mac. Engines

I would like to know if anyone out there can tell me where I can buy a flywheel holder tool for Mac. engines !? Please message me if you think you can help !? Thanks !!!!


Paul Burkle

Author:  Steve O'Hara [ Sun Mar 05, 2017 3:43 am ]
Post subject:  Re: Flywheel Holder Tool For Mac. Engines

Easy to make a flywheel holder out of an old flywheel and some flat bar stock. Just punch the center out of an old flywheel and attach the bar stock to make a handle and you have a tool to hold the flywheel by meshing the fins of the two flywheels together.
Crude but easy on the wallet!.
Steve O'Hara

Author:  Paul Burkle [ Sun Mar 05, 2017 8:13 am ]
Post subject:  Re: Flywheel Holder Tool For Mac. Engines

Ok, thanks and I will consider this. However, I would just prefer buying one of these tools already made if they are sold anywhere !?

Author:  Gary Wlodarsky [ Sun Mar 05, 2017 8:14 am ]
Post subject:  Re: Flywheel Holder Tool For Mac. Engines

and if you don't like that idea,,Roy Fenwick makes them in Indiana,,,,,,,think Jim Donovan has contact info...

gw

Author:  Paul Burkle [ Sun Mar 05, 2017 8:28 am ]
Post subject:  Re: Flywheel Holder Tool For Mac. Engines

Ok, thanks and I will try to get in touch with him then.

Paul

Author:  Rolf Hill [ Sun Mar 05, 2017 10:44 am ]
Post subject:  Re: Flywheel Holder Tool For Mac. Engines

love mine. Got it from Donovan. Of course I had to paint ORANGE.

Author:  Lance Mearing [ Tue Mar 21, 2017 1:24 am ]
Post subject:  Re: Flywheel Holder Tool For Mac. Engines

or you can stick an allen wrench in the hole on the back side of the flywheel cover and lock up the flywheel that way. That's what we did back in the day before flywheel tools.

Author:  Ernie Shores [ Tue Mar 21, 2017 11:52 am ]
Post subject:  Re: Flywheel Holder Tool For Mac. Engines

Rick Magnson has some. I got mine from him and it works perfect.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/