Select Page: Where to?Home
-- General Discussion
-- Safety Discussion
-- For Sale / Wanted Forum Listings
For Sale / Wanted
-- Vintage Karts and Parts
-- Power Products engines & parts
-- West Bend Engines & Parts
-- McCulloch Engines & Parts
-- Materials - Aluminum, Steel, Phenolic, etc...
-- Member Parts & Resource page
-- VKA Meeting Minutes
Select Category: Where to?Karts & Parts
… where it's starting all over again!
Link to For Sale / Wanted Forum Listings
Has anyone got a Tripp Axle Clutch for sale? 1 or 2. They worked great and were for Sprints only. Prefer complete clutches.
Email me at firstname.lastname@example.org if you can help.
WANTED NOS MC 10 or completely stock origional motor with full shroud 100% correct.
Contact Jeff at
760 518 1227 or email@example.com
I’m looking for a 180 degree Hartman header/pipe.
Offering my BM130 C Open engines, yes 2, for sale.
Left size is 56.2 and new piston inside. Right side is the same. No great fin damage. Never blown up.
Jeff Brown prepared…titanium rods, porting, etc. Left (genuine) and a Right with 3rd bearing housings, extension shafts, methanol Mikunis, Motoplats, headers (straight, need tipping up).
Burco 10 tooth chrome drums, 4 shoe clutches available, extra.
Serious offers only, please, to firstname.lastname@example.org.
Thanks, I have too many motors! And too many karts too.
Can you give me a idea about pricing for the 2 BM130’s, I have one vintage karter looking for dual 135cc type engines. I would be responsible for engine/clutch/pipe preparation.
Please respond via email.
Need 10 tooth DXL 3 Disk horstman clutch drum email@example.com Bob K 661 802 7327
1982 MARGAY EXPERT Black powder coat all re done, kt-100 Yamaha,horstman oil clutch,sprint pipe,race ready. You can buy it now ,and pick it up and race it at Adams if you like,it is turn key. PRICE $1000 bottom line! firstname.lastname@example.org If you give me your e-mail I can Send pics Thanks Bob K 661 802 7327
Hi can you send photo
And where are you located
Send me your E-Mail I will be glad to send you some pics I live in quartz hill ca 40 miles from san Fernando valley or 65 miles from L A CA Send your E-Mail to email@example.com
Still have it,took it to adams ran it runs very good. Boy it race it now!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Bob, I am interested. Any photos? Would be shipped to Ohio, 44081. need a sprinter for my Bomb. Thanks, Colm
A friend of a friend is looking for a MC-10. I saw one on eBay for $650. No clue if that’s a good price. Don’t want to steer this guy wrong. Can anyone help?
Looking for an old enduro butterfly steering wheel–’67–>early ’70’s vintage.
Anyone got anything ? THANKS
Need a fuel tank for a Bug Spider 1 enduro kart it had just one tank and was mounted on the right side of the kart not sure what year this kart was made in the 70’s I have a picture of the kart and trying to restore one to look like what I had to display any help in find the tank would be great.
I need a homelite cylinder at least 2.1/8 bore and a piston to fit. phone 419-957-6117. bob hartman
I am looking for a vintage go-kart.Must be gas fed. I am looking for excellant original piece. cell 724-344-0822
I’m looking for Zip karts and or Zip parts.
Mid- Late ’70’s to Mid ’80’s karts and or parts.
Both Zip Sprint ( Class 1 )And Zip 125cc and 250cc Superkarts ( Class 4).
Gary Dolmelt had a brand new(never assembled) Zip for sale last year. I think it was a 983. I’m not sure but I think Dave Sagan may have purchased it. I would have called you but your number is only 9 digits long. I will ask Dave if he has it and what his plans are for it if he does.
That new ZIP that Gary had was bought by me. I have not assembled it yet but it’s now in Australia,, Just thought I’d let you know.
Need a PTO crank half for a Komet K-55 (100cc reed valve engine). Will be at Whiteland, IN Vintage Race.
Looking to sell or trade my 1970’s Meyers Lancer sidewinder sprint kart with a good running DAP T90 100cc reed engine, DXL wet clutch newly rebuilt by Howard K. with modern friction disc material. Bumpers were rechromed and frame was powder coated in 2002. Needs spot welding at the steering column, but still works fine. Dual engine capable. Vintage legal tires on Margay Star wheels. Also including an original Harley Moped M-50 fuel tank which was used on these karts. Great handling late vintage kart, but I want to get into a rear engine kart. $1500 for VKA members, or possibly trade the whole thing for a Bug Sprint chassis! If that is too low, you can start bidding at $1800 on ebay!
Your email address will not be published. Required fields are marked *
You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>
Current day month ye@r *
Leave this field empty *